keyboard_arrow_rightkeyboard_arrow_left
Call us at (866)OUTLAWS M-F 9am-6:30pm ET Email us at: [email protected]
Call us at (866)OUTLAWS M-F 9am-6:30pm ET Email us at: [email protected]
Model 7000x 7-Channel Amplifier
$1,099.00
Looking for 7 channels of amplification? The Model 7000X stands tall dishing out 7x130W into 8Ω and 7x200W into 4Ω. With both RCA and XLR inputs sporting common mode rejection, it’s as versatile as they come.
Like every piece of Outlaw gear, the Model 7000X delivers:
Neutral sonic signature
Minimal total harmonic distortion
Plenty of headroom.
Are you looking to use the Model 7000x in place of the amplifier sections of an AVR? Look here for more information.
If it doesn’t beat the big brands in quality-to-value, it doesn’t get the Outlaw badge.
 See Front Panel Huge |
 See Rear Panel Huge |
Reviews
Home Theater Hobbyist Upscaled HT StereoWise - Written Review StereoWise - Video
Support Documents
Free shippingOn orders over $500 (lower 48 states)
30-day money-back trial
Ships within 5 business daysVia ground shipping
The Model 7000X from Outlaw Audio has the firepower to tame almost any home theater. This 7-channel amplifier is rated at 7 x 130 watts (all channels driven) into 8 ohms and a mighty 7 x 200 watts into 4 ohms. With both RCA and XLR inputs, it's ready for any showdown.
True to Outlaw form, the Model 7000X is crafted with a neutral sonic signature, low total harmonic distortion and ample headroom. Thanks to the use of THAT Corporation chips, the 7000X features a balanced input stage with common mode rejection, ensuring high-fidelity performance in the face of EMI or RFI.
And for those with unbalanced inputs, our differential-sensing RCA circuit is there to shoot down input hum. We've never packed this much power and versatility into a dual-input amplifier at this price.
The Model 7000X: unmatched power, crystal-clear sound and ready for action!
7000X
Data sheet
- Crosstalk
- Greater than -70dB from 20Hz – 20kHz
- Frequency Response
- 20Hz -20kHz +/- 0.5 dB at rated output (130W)
- Input Impedance
- 40KOhms
- Input Sensitivity
- 1.2 Volts
- Intermodulation Distortion
- Less than 0.05% from 250mV to full rated output (130W)
- Power Bandwidth
- 5Hz - 54kHz +0/-3 dB
- Power Output
- 130 watts RMS x 7 (all channels driven simultaneously into 8 ohms from 20 Hz to 20 kHz with less than 0.03% total harmonic distortion, A-weighted filter)
200 watts RMS x 7 into 4 ohms (from 20 Hz to 20 kHz with less than 0.06% total harmonic distortion, A-weighted filter) - Signal to Noise
- 111dB A-Weighted
- Voltage Gain
- 28dB
- Dimensions
- 5.8215" x 17.0" x 16.75" (HxWxD)
Specific References
- UPC
- 885547702927
Just buy it!
I've been using AV receivers only for a long time. This cycle I decided to use the receiver as a preamp and get an Outlaw. Wish I had done it a long time ago! I am hearing details I have only heard in high end audio stores.
Great amplifier. Please use the ground if you're experiencing no
Great amp. Plenty of power. There was a loud hum initially when set up but grounding it to my AV reciever quickly solved the issue which is clearly explained in the owners manual. Detail at low volume is phenomenal now and boy does it get rowdy when you turn it up. Very Happy.
Outlaw x7000
Excellent value! Excellent sound! 5 star purchase!!!
Great Sound Quality
Sounds great. Highly recommended.
Good unit BUT may not be true XLR
Very heavy unit, great sound but may not be true XLR connections.
- 0 out of 2 people found this review useful.
Excellent amp
Unbelievably powerful amp. Sounds awesome. Be warned it is huge and weighs like 60 pounds. Make sure that shelf or stand can support that weight
Great amp
Solid build, very heavy. Clean power, very impressed. Surprised this amp doesn’t cost more.
Plenty of power. Runs so cool!
Before this we ran a Parasound 6 channel Amp which was great except for: A. Because it was only six channels, had to wire the subwoofers to the same Amp, making them share. B. It ran so hot that it necessitated installing it below in the garage which was a wiring nightmare, because it was too hot to be in the house, especially if it needed to be in a cabinet. This Outlaw Amp plays PLENTY LOUD with excellent quality. To demo it we played the original Jurassic Park to test it at high volume. Subwoofers get a massive workout in the intense T-Rex scene, and it truly rocked the house! Each sub having it's own Amp is a plus. Cool to the touch after playing it all day. Fantastic! Also tested it with classical music, gorgeous.
Customers who bought this product also bought:
8 other products in the same category:
Looking for 7 channels of amplification? The Model 7000X stands tall dishing out 7x130W into 8Ω and 7x200W into 4Ω. With both RCA and XLR inputs sporting common mode rejection, it’s as versatile as they come.
Like every piece of Outlaw gear, the Model 7000X delivers:
Neutral sonic signature
Minimal total harmonic distortion
Plenty of headroom.
Are you looking to use the Model 7000x in place of the amplifier sections of an AVR? Look here for more information.
If it doesn’t beat the big brands in quality-to-value, it doesn’t get the Outlaw badge.
| See Front Panel Huge |
See Rear Panel Huge |
Reviews
Home Theater Hobbyist Upscaled HT StereoWise - Written Review StereoWise - Video
Support Documents
Model 7000x 7-Channel Amplifier
$1,099.00
6month review
It has been six months since I bought this amp. I have a Marantz revamp, and custom speakers . Two 12 inch subs and three way woofer, mid, and tweeters. The stereo is on pretty much 8 hours a day.The speakers are all 4 ohms. The sound is phenomenal at any volume. This is sold amp and I have had several amps before from an old Carver and Yamaha. This amp delivers, no complaints at all . Doesn’t even get hot. Would definitely recommend this amp.